instellingen dualport tnc (tnc3s) (kpc1296)

Alles over packetradio en digimodes op de 27MHz

Moderators: 19-AT-068 Frank, Thijs, Remco Rozenburg, erik_ark

instellingen dualport tnc (tnc3s) (kpc1296)

Berichtdoor CB2SNK » 14 sep 2015, 00:11

From : NL2SNE
To : AX25 @WW
Type/Status : B$
Date/Time : 13-Sep 23:00
Bid : 192_CB9SNK
Message # : 192
Title : dualport tnc's
Hi,
Spinning around with the latest ax25tools to get my tnc3s going.
I found out how the mkiss program works out for connecting the tnc3 to the compu
ter.

root@raspberrypi:/home/pi/linbpq# mkiss -s 19200 -x 1 /dev/ttyAMA0 /dev/ptmx

Awaiting client connects on:
/dev/pts/5 /dev/pts/6
root@raspberrypi:/home/pi/linbpq# kissattach /dev/pts/5 2 44.137.86.1
AX.25 port 2 bound to device ax1
root@raspberrypi:/home/pi/linbpq# kissattach /dev/pts/6 2 44.137.86.2
AX.25 port 2 bound to device ax2
root@raspberrypi:/home/pi/linbpq#

ttyAMA0 is in this case my uart of the raspberry but could be ttyUSB0 or so for
a usb <-> rs232 converter.

must say i did not have the change to test it on RF but will do soon.

hope this info comes in handy..

73 Danny NL2SNE / PA2SNK
CB: CB2SNK @ NL3VKL.NBO.NLD.EU
HAM: PA2SNK @ PD0LPM.#FRL.NLD.EURO
CB2SNK
www.cbforum.nl Freak
www.cbforum.nl Freak
 
Berichten: 371
Geregistreerd: 07 jan 2008, 22:15
Woonplaats: Sneek

Keer terug naar Digimodes (Packetradio, PSK, RTTY, ROS, etc)

Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers. en 31 gasten