Moderators: 19-AT-068 Frank, Thijs, Remco Rozenburg, erik_ark
FT-990 - 1.5 to 30 MHZ TX mod
Open FT990 like explained in your OPERATING MANUAL.
Localize JP5002 on "CONTROL UNIT" and close it with solder.
If no transmit between 4 to 6.5 MHZ and 8 to 10 MHZ, do the following:
Display 5.5 MHZ in CW mode, "meter selector" to ALC, push "MOX" button and adjust VR1003 on "RF UNIT" for normal ALC meter deflection.
Display 9 MHZ and do the same with VR1005.
Gebruikers op dit forum: Geen geregistreerde gebruikers. en 73 gasten